OUR TOOLS
ARC50

Ideal instrument for the direct READOUT of the internal and external RADII in millimeters/inches. Available in versions with arcs 40, 130, 300, 500 and 1000

ST STANDARD ROLLS
SP SPECIAL ROLLS: created on customer’s request
RT ROLLS FOR TUBE: suitable for the bending of tubes
RO ROLLS FOR OVAL: suitable for the bending of oval tubes
RQ ROLLS FOR SQUARE: suitable for the bending of square tubes
RVT ROLLS FOR TUBE WITH V GROOVE
RVQ ROLLS FOR SQUARE WITH V GROOVE
AI MECHANICAL (AI-M) or HYDRAULICAL (AI-H) DEVICE with double correction for maintaining at the right angle leg-in and other asymmetric profiles during the bending
TR TIE BAR to bind the 3 shafts and to maintain their parallelism. Indispensable with long shafts (AL). To be used only with constant radii
SI INDEPENDENT SUPPORTS to be mounted on each shaft to maintain their parallelism and to increase significantly the maximum bending capacity (to be used also for bending with variable radii)
HE MECHANICAL EQUIPMENT for the bending in hard-way of beams IPE, IPN, HEA, HEB and UPN
QR FORTH ROLL DEVICE to bend asymmetric profiles, with open and special section
AC SHORT SHAFTS. Suitable to realize coils with straight end parts and in all cases of interference of the shafts with the section in bending.
ROS Device to realize HANDRAILS for helicoidally stairs for DS50, DS60, DS80, ALPHA 40, ALPHA 50, DELTA 50, ALPHA 80 and DELTA60. Upon request for other models.
FT 6 HARDENED FLANGES in steel to be used with standard (ST) and polyvalent (POL) rolls
FP 6 FLANGES in steel to be used with standard (ST) and polyvalent (POL) rolls
POL POLYVALENT ROLLS on request for DS50, DS60 and DS80 BASIC. To integrate with standard rolls (ST), composed by 6 flanges and 6 inserts hardened and treated
AL LONG SHAFTS for large section profiles. In most of cases it is necessary to use the tie bar (TR).
PI GA/1 CLAMP for automatic tube-turner device (GA)
GA Automatic TUBE-TURNER device for bending tubes in 3D. Standard length 6 meters. To be used with SLALOM and ALPHA models
TOR Device for TWISTING plate, square and rectangular profiles to realize ornamental rods. To be used with DS50, DS60 and DS80. Upon request for other models
ATV Device to realize ORNAMENTAL SWIRLS with plate, square and rectangular profiles. To be used with DS50, DS60 and DS80. Upon request for other models